Tools And Cutters

Designed as a simple economical and portable method for splicing small wire ropes. Jaws are marked to denote:'A Type B.S. Ferrules','D Type Din 3093 (intal) Ferrule'.

A small simple solution for making occansional splices. If large quantities of splices are required use hand crimping tool. Suitable for 1.5, 2, 2.5, 3 and 4mm A type ferrules.

High quality Japanese made heavy duty cutters. New blades and handles are available.

Top quality Swiss-made Felco wire cutters in 4 sizes for wire from 5-12mm. Cable cutters are part of RORC requirements and are essential for having on board to cut away rigging in an emergency.

Professional wire tension guage. Ideal for determining loads on rigging wires, or any application where cable or wires are installed under load. Manufactured of rugged anodized aluminum, this gauge is corrosive resistant and will give years of service. Detailed operating instructions are included with each tension gauge. Higher accuracy and easier to use than other models. The cable can be adjusted while the gauge remains on the cable. 'Just watch the pointer move.'

An economical alternative to the well known Professional Loos Gauge. Surecheck offers a quality product for tensioning wire from 2.5mm - 10mm Diameters. Please note these are not suitable for rod rigging.

At last a easy to use, inexpensive gauge to measure the tension in rod rigging.
-Accurate to within +/- 5%
-Marine and other structural applications
-Remains on rod while tension is adjusted

Compact, econmical wire stay tension metre from the market leading brand Loos and Co.