Products

Made from 316 Stainless Steel with a Nylon trim. Attaches to grab rail with an end plug and to the exposed part of the frame by clamping the screws. Sold in handed pairs.

Made from 316 stainless steel, can be assembled on to existing frames without removal. Makes more complex structures possible.

Made from 316 stainless steel and Nylon. Designed for use with keyhole plates to create a quick and easy system for removing a canopy.

Made from 316 stainless steel and Nylon. Use where easy adjustment is required.

Made from 316 stainless steel and Nylon.

Makes use of short lengths of tube. Each set comprises of 3 standard type end plugs 2 white support pillars and 1 hand clamp.

Comprises of universal deck fitting, assembled to a low friction slider. Part No. 0604 is secured into position using a hand knob. Part No. M2616 is secured with a sprung loaded pin.

Heavy duty Barton track and slider. The heavy duty deck fitting is assembled onto the 32mm anodised aluminium car that locks with a sprung pull pin.

Made from polished 316 stainless steel. Ideal for forming canopies and sprayhoods, compatible with our Canopy Fittings and Handrail ranges.

Sold by the metre, the maximum length is 6 metres if collected or 2 metres when sent by a carrier - 2 metre lengths incur an extra shipping charge. The Maximum length for post is 60cm. Long lengths of tube are sent at your own risk. Please detail your cutting requirements when you order.

Note: Tube is cut by hand with a hacksaw and may not be precise in it's length and may show slight marks from the vice. We can cut your tube in half for ease of shipping, if more than 1 cut per metre is required an extra charge may be applied.