Grips And Ferrules


Wire Rope Grips (Bulldog Grips)

Made in 316 stainless steel.

Double Wire Clamps (Duplex Clamps)

Simply place wire through throug the clamp, replace the plate and tighten the nuts to make an eye in your wire. We recomend not using 1x19 wire larger than 4mm as it is very difficult to get into the clamp. Made in 316 stainless steel.

Copper Ferrules

For crimping stainless steel wire rope. Suitable for hand swaging tools and for Talurit systems. Ferrules are A type made to B.S. 5281.

Aluminium Alloy Ferrules

For crimping galvanized wire rope. Suitable for hand swaging tools and for Talurit systems. ferrules are A type made to B.S. 5281.

Copper Ferrules (DIN Type)

For crimping Stainless Steel wire rope. Suitable for hand swaging tools and for talurit systems. Din type ferrules are longer but have a thinner wall section to British Standard Ferrules so please check you have the right tool for the ferrule.

Single Wire Clamps (Simplex Clamps)

Simply place wire through through the clamp, replace the plate and tighten the nuts to make an eye in your wire. We recommend not using 1x19 wire larger than 4mm as it is very difficult to get into the clamp. Made in 316 stainless steel.

Double Wire Clamps (Duplex Clamps) Pre Pack

Simply place wire through throug the clamp, replace the plate and tighten the nuts to make an eye in your wire. We recomend not using 1x19 wire larger than 4mm as it is very difficult to get into the clamp. Made in 316 stainless steel.

Nicopress Ferrules

Zinc plated copper for stainless wire. Only for use with nicopress tools. 

Nicopress Ferrules

Aluminium for Galvanised Wire. Only for use with nicopress tools.

Cross Wire Clamps

Stainless Steel cross wire clamps.

Wire End Stops

Wire Rope Stopper

Wire Rope Grips (Bulldog Grips)

Made in 316 stainless steel.

0 Item(s)
£0.00