Welcome, Guest
Made from highly polished 304 Stainless Steel. Easily Removable when not in use, the holder simply slots into the base plate. Base plate dimensions W=91mm, H=100mm, Use 4 x M6 countersunk machine screws or no.12 self tapping screws
Made from highly polished 304 Stainless Steel. Easily Removable when not in use, the holder simply slots into the base plate.
Base plate dimensions W=91mm, H=100mm, Use 4 x M6 countersunk machine screws or no.12 self tapping screws
Made from highly polished 304 Stainless Steel. This discreet rod holder comes with a rubber seal and a rubber cap to prevent water filling the holder. Use 3 x countersunk M6 machine screws or No.12 self tapping screws.
Made from highly polished 316 Stainless Steel. Suitable for rails of 3/4" up to 1", simply clamps to the rail, the angle of the rod holder can be changed by rotating on the rail and the clamp can also be rotated to take up most angles for fitting to pushpit/pullpit legs.
Made from black plastic with foam inserts, supplied complete with screws. Available as either Horizontal fixing or vertical fixing.
Baseline Bosun's Chair
Asymmetric Snap Hook
Rubbing Strake
Transom Mount Ski Hook
Hi-Mod Open Body Fork/Compression Fitting
Hi-Mod Toggle & Compression Fitting
Hi-Mod Open Body Toggle & Compression Fitting
Hi-Mod Open Body Fork & Toggle Rigging Screw
Hi-Mod Open Body Stud & Toggle Rigging Screw