Hinges and Hatch Fittings


Hasp And Staple

Made from 316 stainless steel. Robust and popular hasp and staple.

Anti-Rattle Hasp And Staple

Made from 316 stainless steel. With twisting staple carbon and anti-rattle washer to enable you to have the hasp closed but still allowing you to open at will. Comes with hole for an 8mm thick padlock.

Stainless Steel Hinges

Made from pressed 316 stainless steel. Use M5 or No.8 Csk screws.

Solid Hinges

Solid hinges in stainless steel and Nylon. Use No.8 countersunk screws.

Drilled Piano Hinge

In 305 stainless steel.

Flush Pull Ring

Stainless steel sprung loaded pull ring. Use No.6 screws or M4 countersunk machine screws. Available in 2 sizes.

Pull Ring - Chrome Plated Brass

Pull Ring for flush mounting. Made from Chrome Plated Brass.

Hatch Fastener

Popular hatch fastener with lever locking action. Made from chrome plated brass.

Cabin Hook

Made from 316 stainless steel. 

Barrel Bolts

Available in 2 sizes. Made from 316 stainless steel.

Spring Clips

Handy tube and pipe clips in a wide range of sizes. Made from durable Grey Nylon for marine conditions.

Chart Table / Hatch Spring

This clever device is used for holding hatches open. You simply lift the hatch cover and let go. The spring snaps straight and holds the lid up without any effort on your part. To close the hatch, simply bend the spring into a "U" shape while closing the lid. The spring will be ready the next time you open the hatch. It has an internal wire that prevents the spring from being over-extended during normal use. Not recommended for applications where hatch will scoop wind while boat is underway and over-extend spring.

222mm long. Simply to operate, easy to install, maintenance free. Made from stainless steel.

Solid 316 Stainless Steel Hinges

Solid type hinges, various designs. Made from 316 stainless steel.

Offset Solid Hinges

Made from 316 stainless steel.

Elbow Catch And Teak Ring

Brass elbow catch and matching teak finger ring. Each is available as a replacement or purchase both as complete set.

Large Push Button Latch and Knobs

Ideal as replacements or refurbishment items in your cabin.

Pelase note the latch fits all styles of knob and knobs are sold separately.
 
Part No. 9468A Stainless Steel flush striker plate.
 
Part No. 9468 Chrome Plated corner striker plate.

Rounded Hasp and Staple

Rounded hasp and staple, made in UK by Seasure from 316 Stainless Steel.

Stainless Steel Spring Clip

Stainless steel spring slip, can also be used as a boat hook holder. Come sin 2 sizes capable of taking a 20mm and 28mm round pole. Made from 304 stainless steel.

Flush Lift Up Handle

Stainless steel sprung loaded pull handle. Use No.8 screws or M5 countersunk machine screws.

Hatch Covers

Tough plastic hatch covers and 'O' rings

Hasp And Staple

Made from 316 stainless steel. Robust and popular hasp and staple.

A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
0 Item(s)
£0.00